⬆

Requirements

A GDoor adapter with at least version 4.0 is needed.

Setup

Go to the configuration page of your GDoor device. You can setup the connection string of you VOIP server. The scheme is udp://username:password@server:portnumber

Configuration

GDoor currently offers 4 slots. Each slot is a individual configuration to handle a audio related action and can be enabled or disabled independently.

A slot has the following settings:

  • Outgoing Call: Enable or disable that this slot initiates outgoing VOIP calls.
  • Trigger Action: The basic action which trigger this slot, it is the ACTION field in the incoming bus message which needs to match.
    • BUTTON_RING: An action is triggered, when a ring button on a outdoor station is pressed.
    • CALL_INTERNAL: An action is triggered, when a internal call is initiated.
  • Outdoor Address: This is a 2-Byte hexadecimal value. Do not prefix 0x. This address is used to match the source field of the incoming bus message, so that the slot is only triggered for a certain station. Leave empty to trigger an all stations.
  • Button No.: The button number to trigger. It is the first byte of the parameter field in the incoming bus message. Leave empty to trigger an all button presses.
  • Dest. Phone No.: The phone number which is called by GDoor when this slot is triggered.

Tested Setups

Currently tested are:

  • FritzBox as VOIP server
  • GDoor v4.0 as software VOIP client.
  • Linphone as software VOIP client, which GDoor calls, when a button is pressed